What it’s used for
Port forwarding lets external devices access services on your local network through your internet connection. Common uses include:
Online gaming that requires direct connections
Hosting a website or server from home
Remote access to a security camera, NAS device or desktop computer
Peer-to-peer applications like torrents or voice chat services
In simple terms, it opens a small door in your network that directs incoming traffic to the right device.
Static IP required
By default, most Splice plans are delivered via CG-NAT, which is not compatible with port forwarding.
You can opt-out of CG-NAT by subscribing to a Static IP for $5 per month. This will need to be enabled before port forwarding can be configured. Please contact us to organise CG-NAT opt-out for your service using the contact details below.
How to set it up (Nokia router)
If you're using a Nokia router supplied by Splice, here’s how to configure port forwarding:
Open a browser and go to http://192.168.1.254
Log in with your router credentials
Username: usually
userAdminPassword: check the sticker on your router if unsure
Navigate to the Port Forwarding section (sometimes under Advanced Settings or NAT)
Click Add New Rule or similar
Enter:
A name for the rule (e.g. “Minecraft Server”)
The external and internal port number
The protocol (TCP, UDP or both)
The internal IP address of the device you're forwarding to
Save the settings and reboot the router if needed
Your device should now be reachable from outside your network.
Security tips
Opening ports can expose your devices to the wider internet, so it’s important to do it safely.
If you're not familiar with how port forwarding works or the risks involved, we recommend contacting our support team first. A misstep could leave your network vulnerable to hacking or data theft.
If you do proceed, keep these tips in mind:
Only open ports you actually need
Use strong passwords on any services you expose
Keep your devices and software updated
Disable or remove port rules when they’re no longer needed
Avoid forwarding access to sensitive devices like personal computers unless absolutely necessary
Important note on terms of use
Any use of port forwarding must comply with our Acceptable Use Policy and Standard Form of Agreement. You're responsible for keeping your service secure and must not run any service that could:
Disrupt other users
Expose the network to risk
Violate laws or third-party rights
Breaches may lead to service restriction, suspension, or disconnection.
We’re happy to talk through your setup and make sure it’s safe and supported.
You can contact us via:
Related help
Can I BYO my own NTD/ONT?
If you're getting connected to fibre, you might be wondering whether you can use your own NTD or ONT. Here’s what those devices do, and why Rural Fibre Co…
Understanding Rural Fibre Co's fibre technology – GPON explained
You might have seen the term GPON when reading about your fibre connection. Here’s a simple breakdown of what it means, how it works, and why Rural Fibre Co…
Bridge mode vs router mode
This article is for Rural Fibre Co customers who are supplied a Nokia beacon as part of their connection. What’s the difference between bridge and router…