What’s an NTD/ONT?
The NTD (Network Termination Device) or ONT (Optical Network Terminal) is the device that connects your fibre line to your home network.
With Splice, this is an all-in-one unit supplied by Rural Fibre Co that includes:
The fibre termination point (NTD/ONT)
A built-in ONU (Optical Network Unit)
A full-featured WiFi router
This means a single device handles everything—from converting the fibre signal to managing your home network and WiFi. It's the gateway between the fibre outside and your internet setup inside, with no extra hardware needed.
Can I supply my own NTD/ONT?
No. Customers must use the Rural Fibre Co–supplied NTD/ONT, typically a Nokia unit. These devices are professionally installed, securely registered to the network, and configured to meet carrier standards.
Using third-party equipment is not supported, and may prevent your service from being activated. For safety, compatibility, and support reasons, only equipment installed by Rural Fibre Co can be used.
Can I supply my own router?
Yes.
The NTD/ONT device that we supply includes onboard Wi-Fi and ethernet capabilities, but you may wish to use another router with our service. We can assist by activating Bridge Mode on the supplied Nokia device. Please contact us using the details below for more information or to request Bridge Mode activation.
What’s provided and where it goes
During installation, a qualified technician will supply and install the NTD/ONT. It’s usually mounted on an internal wall near a power outlet, in a location where you can easily connect your own devices via Ethernet or WiFi.
The unit remains the property of Rural Fibre Co (not the homeowner or tenant), and must not be removed, relocated, or replaced without approval.
If you have any questions about setup, placement, or getting connected, we’re here to help:
You can contact us via:
Related help
Understanding Rural Fibre Co's fibre technology – GPON explained
You might have seen the term GPON when reading about your fibre connection. Here’s a simple breakdown of what it means, how it works, and why Rural Fibre Co…
Bridge mode vs router mode
This article is for Rural Fibre Co customers who are supplied a Nokia beacon as part of their connection. What’s the difference between bridge and router…
IPv4 vs IPv6 support
You may have seen references to IPv4 and IPv6 and wondered what the difference is—or whether it affects your internet service. Here’s a quick overview, plus…