Device won’t connect to WiFi? Try this first.
Sometimes devices just won’t connect like they should.
It might reject the password.
It might refuse to connect without giving a reason.
Or it might connect… then drop out again.
Before we try anything complicated, start with this;
Step 1: Reboot everything
The first step is always to reboot:
Your ONT router
The device that won’t connect (TV, laptop, phone, etc.)
The best way to do this is to turn them off at the power point, wait about 10 seconds, then turn them back on.
For TVs and similar devices, switch them off at the wall. This makes sure they are fully powered down, not just in standby mode.
Once everything has restarted, try connecting again.
If it works, great. If not, keep reading.
Step 2: Check your WiFi security settings
Sometimes older devices don’t work well with newer WiFi security settings.
In particular, some older TVs, printers and laptops struggle with WPA3 security. Changing the setting to WPA2-Personal often fixes the issue.
You’ll need another device that can connect to your internet (such as a phone, tablet or computer).
How to change the setting
1. Open an internet browser (Chrome, Safari, Edge or Firefox).
2. In the address bar at the top, type:
http://192.168.1.254
3. You’ll see a login screen.
Username: userAdmin
Password: Your WiFi password (printed on the bottom of your ONT router)

4. Once logged in, look at the menu on the left-hand side and click WiFi.
5. Click Details.

6. Scroll down to find Encryption mode.
It will likely be set to something like WPA3-Personal.

7. Change it to WPA2-Personal.
8. Click Save at the top of the page.
Your WiFi will briefly reboot. Give it a few minutes.
Step 3: Try connecting again
Once your WiFi has restarted, try reconnecting the device that was having trouble.
If it connects, you’re all set.
If you’re still having issues, please get in touch using the contact details below. We’re happy to help.
Related help
How to reboot your modem/router
A simple reboot can often fix connection issues – here’s how to do it safely and when it’s most useful. Safe restart instructions Power off your modem/router…
How to enable WPS
Sometimes, devices need a function known as WPS -or Wireless Protected Setup- in order to be connected. This setting is typically disabled on your ONT, so…
What devices work best with fibre connections?
A fibre connection from Rural Fibre Co delivers high speeds and low latency – but the devices you use can impact how much of that performance you experience.…