Safe restart instructions
Power off your modem/router (NTD/ONT) using the switch on the back or by unplugging it from the wall.
Wait until all the lights go out.
Wait 30 seconds after the last light turns off – this clears temporary settings and resets the hardware.
Power back on and wait 2–3 minutes for the lights to stabilise before testing your internet. You should see stable green lights once complete.
When to reboot
After a planned or unplanned outage.
If you notice slower than usual speeds.
After making changes to your NTD/ONT settings.
Avoid constant reboots
If you find yourself rebooting your NTD/ONT frequently (daily or more), it may be a sign of:
A hardware fault.
An intermittent network issue.
Problems with your in-home wiring or setup.
In these cases it's time to reach out to Splice Support so we can investigate and resolve the root cause. That may mean a visit from Rural Fibre Co's team and a new box for your house.
You can contact us via:
Remember: A reboot is different from a factory reset – a factory reset will erase all settings. If you’re unsure which to do, check with our team before holding down the reset button.
Related help
How to enable WPS
Sometimes, devices need a function known as WPS -or Wireless Protected Setup- in order to be connected. This setting is typically disabled on your ONT, so…
What devices work best with fibre connections?
A fibre connection from Rural Fibre Co delivers high speeds and low latency – but the devices you use can impact how much of that performance you experience.…
How to improve your WiFi performance
A strong fibre connection is only as good as your in-home WiFi. Here’s how to get the best possible coverage and speed. Router placement When your lead-in is…