1. Check for outages
If there’s an outage, we’ll post updates and an estimated time for restoration.
2. Restart your equipment
Sometimes a quick reset can solve the problem.
Turn off your NTD/ONT (Network Termination Device / Optical Network Terminal).
Wait 30 seconds.
Turn the NTD/ONT back on.
Wait 2–3 minutes for the connection to re-establish.
3. Check your cables and connections
Make sure all cables are plugged in firmly and haven’t been accidentally unplugged or damaged.
Make sure the power lead is plugged in at both ends, and check the Power and PON lights are steady green—this means the NTD/ONT is powered and connected to the network.
4. Contact support if needed
If you’ve tried the above and your internet is still not working:
Contact Splice Support
Call from the affected premises if you can
If you can, have at hand:
Your account details.
A brief description of the issue.
What troubleshooting steps you’ve already tried.
You can contact us via:
Tip: If your WiFi isn’t working but a wired connection is, it’s likely a WiFi configuration issue – our support team can help fix it quickly.
Related help
How to reboot your modem/router
A simple reboot can often fix connection issues – here’s how to do it safely and when it’s most useful. Safe restart instructions Power off your modem/router…
How to enable WPS
Sometimes, devices need a function known as WPS -or Wireless Protected Setup- in order to be connected. This setting is typically disabled on your ONT, so…
What devices work best with fibre connections?
A fibre connection from Rural Fibre Co delivers high speeds and low latency – but the devices you use can impact how much of that performance you experience.…