Splice Internet — Business & Enterprise. Symmetrical lit fibre on the RFC network.
This agreement sets out what you can expect from a Splice Internet (Splice) business or enterprise fibre service: the speeds on offer, the uptime and restoration we commit to, and what happens if we miss those commitments. It applies to commercial, enterprise and government customers alike.
1. The service
Splice delivers symmetrical lit services over the Rural Fibre Co (RFC) network. Symmetrical means your upload speed matches your download speed, so large file transfers, backups, video calls and hosted services run at the plan's provisioned speed in both directions. Actual throughput can vary with your in-premises equipment, cabling and Wi-Fi beyond the NTD, and with the services you connect to. Lit fibre means the connection is active and managed end to end, as opposed to dark (unlit) fibre.
Every service in this agreement is delivered on RFC fibre and carries a defined service level: either Silver or Gold. The two levels share the same speed options. What changes between them is the minimum uptime we target, how fast we commit to restoring a fault, the support you get, and the credits that apply if we ever fall short.
2. Definitions
Service — the Splice Internet business or enterprise fibre connection supplied under this agreement.
Monthly access fee — the recurring monthly charge for the service, used as the basis for any service credit calculation.
Outage — a period during which the service is fully unavailable, confirmed by Splice from a fault you have reported.
Restoration target — the time within which we aim to restore the service after a fault is reported.
Uptime target — the proportion of a calendar month the service is expected to be available.
Service credit — an amount credited to your account when we miss a committed restoration target, calculated as set out below.
Business hours — 9:00am to 6:00pm AEST/AEDT, Monday to Friday, excluding Victorian public holidays.
NOC — the Splice Network Operations Centre, which monitors the network and handles fault response, available on-call for priority faults.
Demarcation point — the Network Termination Device (NTD) at your premises. Splice is responsible for the service up to and including the NTD. Everything past it — your LAN, routers, cabling and other equipment — is yours.
Service commencement (RFS) — the Ready-for-Service date. This is the start date you select when ordering the service, which defaults to same-day activation. The SLA targets and any credits apply from this date.
3. Speed options
A range of speed tiers are available, from 250 Mbps to 10 Gbps. You pick the speed; the service level (Silver or Gold) sets the support and the guarantees around it. Multi-site customers can mix speeds across sites under a single agreement.
4. Service levels at a glance
Here is how Silver and Gold SLA options compare.
Measure | Silver | Gold |
|---|---|---|
Uptime target | 99% | 99.95% |
Restoration target | 24 hours per outage | 4 hours per outage |
Support | Business hours | Priority NOC, on-call |
Service credit trigger | Outage beyond 24 hours | Outage beyond 4 hours |
Credit basis | One day's fee per day down, rounded up | 100% of monthly access fee |
5. Silver service level
Silver suits sites that need a dependable business connection during working hours and can tolerate a longer restoration window on the rare occasion something breaks.
What we commit to
Uptime target of 99% per calendar month.
Restoration target of 24 hours from the time you report a fault.
Business hours support for faults and service questions.
If we miss the restoration target
If a confirmed outage runs longer than 24 hours, we credit you a full day's access fee for each day the service is down, rounded up to the next whole day. A day's access fee is your monthly access fee divided by 30. Because it rounds up, any outage past 24 hours earns at least two days: an outage of 25 hours is credited as two days, and an outage of 49 hours is credited as three days.
6. Gold service level
Gold is built for sites where the connection is critical and downtime is expensive: critical infrastructure, multi-site operations, government services, anything where quick restoration is the standard you need. Gold is included across every tier in the enterprise range.
What we commit to
Uptime target of 99.95% per calendar month.
Restoration target of 4 hours from the time you report a fault.
Priority after-hours support.
If we miss the restoration target
If any single confirmed outage is not restored within 4 hours of you reporting the fault, we credit 100% of that month's access fee for the affected service. One breach of the four-hour target means the month's access fee comes back to you in full.
7. How service credits work
Credits are our accountability for missed restoration targets. A few practical points on how they apply:
Credits are calculated on the monthly access fee for the affected service, not on any one-off charges, install fees or equipment costs.
An outage counts once we have confirmed it from a fault you have logged with us. The restoration clock starts when you report the fault.
To claim a credit, raise it with us within 30 days of the outage. We will confirm the outage duration from our records and apply the credit to a following invoice.
Service credits are your sole remedy under this agreement for a missed restoration target, and are applied as account credits rather than cash refunds. Nothing in this agreement excludes, restricts or modifies any rights or remedies you have under the Australian Consumer Law or other rights that cannot lawfully be excluded.
8. What the targets don't cover
Some things sit outside our control, and the uptime and restoration targets are paused while they apply. These include:
Scheduled or emergency maintenance we have given you reasonable notice of.
Faults caused by your own equipment, wiring, power, or network beyond the NTD (the demarcation point).
Outages caused by events outside our reasonable control, such as natural disasters, fire, flood, or damage to infrastructure by third parties.
Loss of service because of suspension for non-payment or breach of the acceptable use terms.
Delays in restoration caused by us not being able to access your site when access is needed.
9. Support and reporting a fault
Both Silver and Gold customers get dedicated support during business hours, as defined in section 2 (9:00am to 6:00pm AEST/AEDT, Monday to Friday, excluding Victorian public holidays and any shutdowns we have told you about). Gold customers additionally get priority handling through the NOC after hours. Fault restoration SLA timelines commence once you have notified our team through our support channels.
When you report a fault, have your account or service ID handy and a short description of what you are seeing. Splice will confirm your identity, then acknowledge the fault and keep you updated through to restoration.
10. Complaints
If you are not satisfied with how we have handled a fault or any other issue, you can make a complaint through our Complaints Handling Process at splice.au/legal. If we cannot resolve it to your satisfaction, you can contact the Telecommunications Industry Ombudsman (TIO) on 1800 062 058 or at tio.com.au.
This SLA forms part of, and should be read with, the Splice Standard Form of Agreement, Acceptable Use Policy, Critical Information Summary and Privacy & Credit Reporting Policy, all available at splice.au/legal.