Connecting the beacon
Place the beacon in a location where it can receive a strong WiFi signal from your NTD/ONT — ideally halfway between the NDT/ONT and the area where you need better coverage.
Plug the beacon into a power outlet.
Wait for the indicator light to turn solid white — this means it’s connected.
(If the light stays red or blinking for more than 2 minutes, see Troubleshooting below.)
Setting up via the Nokia WiFi app
Download the Nokia WiFi app from the App Store or Google Play.
Open the app and follow the prompts to add a new beacon.
The app will guide you through placement checks and confirm when your beacon is connected.
Using ethernet backhaul (optional but better)
If possible, connect the beacon to your NTD/ONT using an ethernet cable.
This provides a faster, more stable link between your main network and the beacon.
Troubleshooting setup issues
If the beacon isn’t connecting:
Check power – make sure it’s plugged in and the outlet is working.
Check distance – move the beacon closer to your NTD/ONT to ensure it’s within range.
Restart – unplug the beacon, wait 30 seconds, then plug it back in.
Check LEDs – solid white means connected, blinking white means starting up, red means no connection.
If it still won’t connect, open the Nokia WiFi app for guided troubleshooting or contact Splice Support:
Tip: Avoid placing the beacon behind thick walls, near microwaves or fish tanks, or inside cabinets, as this can reduce signal strength.
Related help
What is the Nokia WiFi app?
The Nokia WiFi app is a simple tool that helps you set up, manage, and troubleshoot your Nokia WiFi Beacon and NTD/ONT. It puts full control of your home…
What to expect during house installation
Rural Fibre Co is running brand new fibre cables into your property, no matter what type of technology you've used before. So no matter whether you're a fixed…
What equipment do I need?
Getting connected to Splice Internet on the Rural Fibre Co network is easy because most of what you need comes with your installation. We supply the service…